Publisher's description
This module can be used for the selection, calculation and check of rolling bearings. The programme provides
solutions to the following tasks:
- Selection and check of a suitable bearing. This module includes a database of approx. 5,000 inch rolling bearings
from RBC Bearings, Nice Ball Bearing, General Bearing Company, New Hampshire Ball Bearing, NMB USA Inc.,
MRC Bearing Group, Fafnir Bearings Company, Torrington Company, Timken Company, Barden Precision Bearing,
McGill Manufacturing Co. Inc., NTN Bearing Corporation and INA USA Corporation
- Calculation of basic bearing parameters (life, static safety, etc.).
- Calculation of adjusted bearing life acc. to the new methodology of ISO 281.
- Calculation of load with a pair of tapered roller bearings or a pair angular contact ball bearings resp.
- Support of 2D CAD (AutoCAD, AutoCAD LT, IntelliCAD, Ashlar Graphite, TurboCAD) and 3D CAD in full
calculation package (Autodesk Inventor, SolidWorks, SolidEdge, Pro/E).
In addition to the above given basic calculations, the document also includes several other auxiliary calculations
(e.g. a calculation of lubricant operational viscosity, calculation of mean loads for bearings loaded by variable loads,
calculation of permitted bearing speed, etc.).
The programme uses data, procedures, algorithms and other information from specialised literature, catalogues of
rolling bearings SKF, ISO, ANSI, SAE standards and other sources.
Related standards: ISO 15, ISO 76, ISO 104, ISO 281, ISO 355, ISO 1132, ISO 5593, ISO 5753, ISO 3448, ISO
15312, DIN 615, DIN 620, DIN 625, DIN 628, DIN 630, DIN 635, DIN 711, DIN 715, DIN 720, DIN 722, DIN 728,
BS 290, BS 292, BS 3134, ANSI/ABMA 9-1990, ANSI/ABMA 11-1990.
This module is a part of MITCalc - Mechanical and Technical Calculation Package for gear, belt and chain drives,
bearings, springs, beam, shaft, bolt connection, shaft connection, tolerances and many others.
Size: 2.32MB
Cost: $24.00
What do you
think about
MITCalc - Rolling Bearings Calculation II?
Add your comment
MITCalc |
This multi-language calculation package includes solutions for gearing, belt, chain, springs, beam, shaft, and
many
others. MITCalc support 2D (and 3D) CAD systems, Imperial and Metric units and many international standards
(ANSI, ISO, DIN?.).
MITCalc - Beam Calculation |
Calculations of straight, maximum three times static indefinite beams with constant axis-symmetrical profiles. Simple definition of the beam type, 20 types of cross sections, graphic illustration of the moment, stress, deflection and bending angle.
MITCalc - Bevel Gear Calculation |
Geometric design and strength check of bevel gear with straight and helical toothing. Application supports Imperial
and Metric units, is based on ANSI/AGMA and ISO/DIN standards and support many 2D and 3D CAD systems
MITCalc - Bolted connection |
Geometrical design and strength check of a prestressed bolt connection, loaded by static or cyclic loading resp.,
acting both in the axis of the bolt and in the plane of the connected parts. Calculation support many 2D CAD
systems
MITCalc - Buckling Calculation |
Calculation of the optimum cross-section of slender struts strained for buckling and strength check calculation
according to Johnson, Tetmajer, Euler and Secant method. Simple definition of the strut type - 40 types of
predefined cross sections.
MITCalc - Compression Springs |
Geometric and strength designs of helical compression cylindrical springs loaded with static or fatigue loading.
Application supports Imperial and Metric units, is based on ANSI, ISO, DIN standards and support many 2D and 3D
CAD systems.
MITCalc - Force shaft connection |
Geometric designs and strength checks of force couplings of shafts with hubs (Interference fit, clamping
connection). Application supports Imperial and Metric units and is based on ANSI, ISO, DIN BS, JIS standards.
MITCalc - Internal Spur Gear Calculation |
Geometric design and strength check of internal spur gear with straight and helical toothing. Application supports
Imperial and Metric units, is based on ANSI/AGMA and ISO/DIN standards and support many 2D and 3D CAD
systems.
MITCalc - Multi pulley calculation |
The calculation is developed for geometrical designs of belt and chain transmissions with more sprocket wheels.
Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and support many 2D
CAD systems.
MITCalc - Pinned couplings |
Geometric design and strength check of couplings using pins and clevis pins. Application supports Imperial and
Metric units, is based on ANSI, ISO, DIN, JIS, BS and CSN standards and support many 2D CAD systems
MITCalc - Profiles Calculation |
The calculation solves area characteristics of profiles and mass characteristics of solids created by extrusion or
rotation of the profile. Application is developed in MS Excel, is multi-language and supports Imperial and Metric
units.
MITCalc - Roller Chains Calculation |
Geometrical design and strength check of common chain transmissions using roller chains.The application works
with many 2D and 3D CAD systems and includes corresponding databases of roller chains from ANSI/ASME, ACA,
ISO, DIN, BS and JIS.
MITCalc - Rolling Bearings Calculation I |
Selection, calculation and check of rolling bearings of the company SKF. Application supports Imperial and Metric
units, is based on SKF, ISO, ANSI, SAE standards and support many 2D and 3D CAD systems
MITCalc - Rolling Bearings Calculation III |
Selection, calculation and check of rolling bearings of the company FAG. Application supports Imperial and Metric
units, is based on FAG, INA, ISO, ANSI, SAE standards and support many 2D and 3D CAD systems
MITCalc - Shaft connection |
Geometric designs and strength checks of shaped connections of shafts with hubs (keys, splines). Application
supports Imperial and Metric units, is based on ANSI, ISO, DIN BS, JIS standards and support many 2D CAD
systems
MITCalc - Shafts Calculation |
The calculation is designed for geometrical design and complex strength check of shafts. Application supports
Imperial and Metric units, is based on ANSI, ISO, DIN standards and support many 2D and 3D CAD systems
MITCalc - Springs - 15 types |
Geometric and strength designs of 15 springs types. Application supports Imperial and Metric units, is based on
ANSI, ISO, DIN standards.
MITCalc - Spur Gear Calculation |
Geometric design and strength check of spur gear with straight and helical toothing. Application supports Imperial
and Metric units, is based on ANSI/AGMA and ISO/DIN standards and support many 2D and 3D CAD systems
MITCalc - Technical Formulas |
Solutions to dozens of basic formulas from physics, technology and mechanical engineering. Help, pictures as well
as many selection tables with values of various coefficients and material properties are available for the formulas.
Units convertor.
MITCalc - Tension Springs |
Geometric and strength designs of helical tension cylindrical springs loaded with static loading. Application supports
Imperial and Metric units, is based on ANSI, ISO, DIN standards and support many 2D and 3D CAD systems.
MITCalc - Timing Belts Calculation |
Geometric design and strength check of toothed belt transmissions. Application contain a database of timing belts,
supports Imperial and Metric units, is based on ANSI, RMA, ISO, DIN and BS standards and support many 2D and
3D CAD systems.
MITCalc - Tolerance analysis |
Two programs for the tolerance analysis of linear, 2D and 3D dimensional chains (Worst case, Root Sum Squares,
Monte Carlo...). Application is developed in MS Excel, is multi-language and supports Imperial and Metric units.
MITCalc - Tolerances |
Calculation includes tables and calculations for easy option of fits of machine parts and determination of their
dimensional tolerances and deviations. Application is developed in MS Excel, is multi-language and supports
Imperial and Metric units.
MITCalc - Torsion Springs |
Geometric and strength designs of spiral cylindrical torsion springs loaded with static or cyclic loading. Application
supports Imperial and Metric units, is based on ANSI, ISO, DIN standards and support many 2D and 3D CAD
systems.
MITCalc - V-Belts Calculation |
Geometric design and strength check of belt transmissions using V-belts. Application contain a database of belts,
supports Imperial and Metric units, is based on ANSI, RMA, ISO, DIN and BS standards and support many 2D and
3D CAD systems.
MITCalc - Worm Gear Calculation |
Geometric design and strength check of worm gear. Application supports Imperial and Metric units, is based on ANSI/AGMA and ISO/DIN standards and support many 2D and 3D CAD systems
MITCalc3D for Autodesk Inventor |
This multi-language calculation package includes solutions for gearing, belt, chain, springs, beam, shaft, and
many others. MITCalc support 2D and 3D CAD systems, Imperial and Metric units and many international standards
(ANSI, ISO, DIN?.).
MITCalc3D for Solid Edge |
This multi-language calculation package includes solutions for gearing, belt, chain, bearing, springs, beam, shaft,
and many others. MITCalc support 2D and 3D CAD systems, Imperial and Metric units and many international
standards (ANSI, ISO, DIN?.).
MITCalc3D for SolidWorks |
This multi-language calculation package includes solutions for gearing, belt, chain, springs, beam, shaft, and
many
others. MITCalc support 2D and 3D CAD systems, Imperial and Metric units and many international standards
(ANSI, ISO, DIN?.).
