Publisher's description
MITCalc is a multi-language set of mechanical, industrial and technical calculations for the day-to-day routines. It will
reliably, precisely, and most of all quickly guide customer through the design of components, the solution of a
technical problem, or a calculation of an engineering point without any significant need for expert knowledge.
MITCalc contains both design and check calculations of many common tasks, such as: spur and bevel gear, belt
and chain gear, bearings, beam, pins, buckling, shaft, springs, bolt connection, shaft connection, tolerance
analysis, tolerances and many others. There are also many material, comparison, and decision tables, including a
system for the administration of resolved tasks. The calculations support both Imperial and Metric units and are
processed according to ANSI, ISO, DIN, BS, CSN and Japanese standards.It is an open system designed in
Microsoft Excel which allows not only easy user-defined modifications and user extensions without any programming
skills, but also mutual interconnection of the calculations, which is unique in the development of tailor-made
complex calculations. The sophisticated interaction with many 2D CAD systems (AutoCAD, AutoCAD LT, IntelliCAD,
Ashlar Graphite, TurboCAD) allows the relevant drawing to be developed in a few seconds (3D CAD systems,
SolidWorks, Solid Edge, Autodesk Inventor are supported in MITCalc 3D). OEM licensing of selected calculations
or the complete product is available as well.
Size: 23.95MB
Cost: $69.00
MITCalc - Beam Calculation |
Calculations of straight, maximum three times static indefinite beams with constant axis-symmetrical profiles. Simple definition of the beam type, 20 types of cross sections, graphic illustration of the moment, stress, deflection and bending angle.
MITCalc - Bevel Gear Calculation |
Geometric design and strength check of bevel gear with straight and helical toothing. Application supports Imperial
and Metric units, is based on ANSI/AGMA and ISO/DIN standards and support many 2D and 3D CAD systems
MITCalc - Bolted connection |
Geometrical design and strength check of a prestressed bolt connection, loaded by static or cyclic loading resp.,
acting both in the axis of the bolt and in the plane of the connected parts. Calculation support many 2D CAD
systems
MITCalc - Buckling Calculation |
Calculation of the optimum cross-section of slender struts strained for buckling and strength check calculation
according to Johnson, Tetmajer, Euler and Secant method. Simple definition of the strut type - 40 types of
predefined cross sections.
MITCalc - Compression Springs |
Geometric and strength designs of helical compression cylindrical springs loaded with static or fatigue loading.
Application supports Imperial and Metric units, is based on ANSI, ISO, DIN standards and support many 2D and 3D
CAD systems.
MITCalc - Force shaft connection |
Geometric designs and strength checks of force couplings of shafts with hubs (Interference fit, clamping
connection). Application supports Imperial and Metric units and is based on ANSI, ISO, DIN BS, JIS standards.
MITCalc - Internal Spur Gear Calculation |
Geometric design and strength check of internal spur gear with straight and helical toothing. Application supports
Imperial and Metric units, is based on ANSI/AGMA and ISO/DIN standards and support many 2D and 3D CAD
systems.
MITCalc - Multi pulley calculation |
The calculation is developed for geometrical designs of belt and chain transmissions with more sprocket wheels.
Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and support many 2D
CAD systems.
MITCalc - Pinned couplings |
Geometric design and strength check of couplings using pins and clevis pins. Application supports Imperial and
Metric units, is based on ANSI, ISO, DIN, JIS, BS and CSN standards and support many 2D CAD systems
MITCalc - Profiles Calculation |
The calculation solves area characteristics of profiles and mass characteristics of solids created by extrusion or
rotation of the profile. Application is developed in MS Excel, is multi-language and supports Imperial and Metric
units.
MITCalc - Roller Chains Calculation |
Geometrical design and strength check of common chain transmissions using roller chains.The application works
with many 2D and 3D CAD systems and includes corresponding databases of roller chains from ANSI/ASME, ACA,
ISO, DIN, BS and JIS.
MITCalc - Rolling Bearings Calculation I |
Selection, calculation and check of rolling bearings of the company SKF. Application supports Imperial and Metric
units, is based on SKF, ISO, ANSI, SAE standards and support many 2D and 3D CAD systems
MITCalc - Rolling Bearings Calculation II |
Selection, calculation and check of rolling bearings (inch versions). Application supports Imperial and Metric units,
is based on SKF, ISO, ANSI, SAE standards and support many 2D and 3D CAD systems
MITCalc - Rolling Bearings Calculation III |
Selection, calculation and check of rolling bearings of the company FAG. Application supports Imperial and Metric
units, is based on FAG, INA, ISO, ANSI, SAE standards and support many 2D and 3D CAD systems
MITCalc - Shaft connection |
Geometric designs and strength checks of shaped connections of shafts with hubs (keys, splines). Application
supports Imperial and Metric units, is based on ANSI, ISO, DIN BS, JIS standards and support many 2D CAD
systems
MITCalc - Shafts Calculation |
The calculation is designed for geometrical design and complex strength check of shafts. Application supports
Imperial and Metric units, is based on ANSI, ISO, DIN standards and support many 2D and 3D CAD systems
MITCalc - Springs - 15 types |
Geometric and strength designs of 15 springs types. Application supports Imperial and Metric units, is based on
ANSI, ISO, DIN standards.
MITCalc - Spur Gear Calculation |
Geometric design and strength check of spur gear with straight and helical toothing. Application supports Imperial
and Metric units, is based on ANSI/AGMA and ISO/DIN standards and support many 2D and 3D CAD systems
MITCalc - Technical Formulas |
Solutions to dozens of basic formulas from physics, technology and mechanical engineering. Help, pictures as well
as many selection tables with values of various coefficients and material properties are available for the formulas.
Units convertor.
MITCalc - Tension Springs |
Geometric and strength designs of helical tension cylindrical springs loaded with static loading. Application supports
Imperial and Metric units, is based on ANSI, ISO, DIN standards and support many 2D and 3D CAD systems.
MITCalc - Timing Belts Calculation |
Geometric design and strength check of toothed belt transmissions. Application contain a database of timing belts,
supports Imperial and Metric units, is based on ANSI, RMA, ISO, DIN and BS standards and support many 2D and
3D CAD systems.
MITCalc - Tolerance analysis |
Two programs for the tolerance analysis of linear, 2D and 3D dimensional chains (Worst case, Root Sum Squares,
Monte Carlo...). Application is developed in MS Excel, is multi-language and supports Imperial and Metric units.
MITCalc - Tolerances |
Calculation includes tables and calculations for easy option of fits of machine parts and determination of their
dimensional tolerances and deviations. Application is developed in MS Excel, is multi-language and supports
Imperial and Metric units.
MITCalc - Torsion Springs |
Geometric and strength designs of spiral cylindrical torsion springs loaded with static or cyclic loading. Application
supports Imperial and Metric units, is based on ANSI, ISO, DIN standards and support many 2D and 3D CAD
systems.
MITCalc - V-Belts Calculation |
Geometric design and strength check of belt transmissions using V-belts. Application contain a database of belts,
supports Imperial and Metric units, is based on ANSI, RMA, ISO, DIN and BS standards and support many 2D and
3D CAD systems.
MITCalc - Worm Gear Calculation |
Geometric design and strength check of worm gear. Application supports Imperial and Metric units, is based on ANSI/AGMA and ISO/DIN standards and support many 2D and 3D CAD systems
MITCalc3D for Autodesk Inventor |
This multi-language calculation package includes solutions for gearing, belt, chain, springs, beam, shaft, and
many others. MITCalc support 2D and 3D CAD systems, Imperial and Metric units and many international standards
(ANSI, ISO, DIN?.).
MITCalc3D for Solid Edge |
This multi-language calculation package includes solutions for gearing, belt, chain, bearing, springs, beam, shaft,
and many others. MITCalc support 2D and 3D CAD systems, Imperial and Metric units and many international
standards (ANSI, ISO, DIN?.).
MITCalc3D for SolidWorks |
This multi-language calculation package includes solutions for gearing, belt, chain, springs, beam, shaft, and
many
others. MITCalc support 2D and 3D CAD systems, Imperial and Metric units and many international standards
(ANSI, ISO, DIN?.).
